Design and Construction of Oil Expeller Press with Structural Analysis of Screw with Ansys
- Production Capacity: 150T~200TPD
- Model Number: GQ-0312
- Voltage: 220V/380V
- Power(W): According to the capacity
- Dimension(L*W*H): 1610x615x1260mm
- Weight: 1050 KG
- Application: various seeds, like soybean, peanut, rapeseed etc.
- After sale serice: Yes
- Mixed oil concentration: 18-25%
- Supply Solvent residual: < 0.07%
- Item: Qi'e turnkey solvent extraction plant process
- Index in crude oil: 50-500ppm
- Solvent: hexane
- Oil residue ratio: 1%
Khan et al. (2016) worked on design, simulation, construction and performance testing of a single-screw oil expeller press for small scale oil extraction. ASME shaft design code was used in
Development and Testing of a Power Operated Coconut Oil Expeller
- Application: Medicine Processing, Chemicals Processing, Plastics Processing, Food Processing, chemical,pharmaceutical,food,plastic,oil,slag,salt,
- Voltage: 220-440V
- Power: according to actual situation
- Dimension(L*W*H): according to actual situation
- Core Components: Gear, Motor, Gearbox
- Heating Method: Steam Heating
- Material: SUS304, SUS316
- Heating source: steam,electricity
- Capacity: design according to customer requirement
- Product name: FZG series vacuum Dryer
- Installation: Engineer Guide
ABSTRACT Although, large scale coconut oil extraction is excessively available, it cannot meet the requirements for a small scale farmer. Deficiency in coconut production and high cost of coconut oil extraction impede the small scale coconut farming. To overcome these problems a power operated coconut oil expeller was developed and tested.
Oil Expeller Manufacturer | Copra Oil Expeller Machines - MBL
- Production Capacity: 98%-100%
- Model Number: dt soybean dehulling machine
- Voltage: 220V/380V/440V
- Power(W): 7.5kw
- Dimension(L*W*H): 1400*600*600mm
- Weight: 1100kg
- Name: soybean dehulling machine
- Color: Silver, red, yellow, green, blue
- Oil yield: 98%
- oil residual: 1-5%
- labor force: 3 persons
- land needed: different sizes
- Material: Stainless Steel 304
- Productivity: 1-2000TPD
- motor: Siemens
- maintenance: engineer service
The moisture content of copra should not be more than 5%, based on M.E.O.M.A Standard. After 1st pressing. 16% to 20% oil content remain in cake. After 2nd pressing. 9% to 10% oil content remain in cake. Worm & Collar / Worm Screw. Hardfacing on worm & collar (worm screw) Thickness of hardfaced layer : 6~8mm. Longer life span.
Crude Coconut Oil Expeller, CoCoMaN Coconut Machines
- Production Capacity: 2T--80T per hour
- Model Number: palm oil mill malaysia
- Voltage: 220V/380V
- Power(W): 7.5kw
- Dimension(L*W*H): 1700*1100*1600mm
- Weight: 800 kg
- Item: palm oil mill malaysia
- Capacity: 2T/H-80T/H
- Product name: CPO
- Function: To produce CPO
- Advantage: advanced technology, many project experiene
- what can we do: turn key, mechanical, civil, electrical, boiler
- installation period: 6--8month
- engineer: send engineer to site
- Manufacturing experience: 35 years
415 V / 3 ph / 50 Hz. Power Rating. 11.00 kw + 3 kw heater. Machine Weight. 700 kg. Packing Size ( L X W X H ) 1.85 X 1.20 X 1.40 m. Crude coconut oil expeller automatically crushes the copra flakes and expels crude coconut oil via a rotating screw.
A TECHNICAL AND ECONOMIC EVALUATION
- Production Capacity: 100% oil solvent extraction line
- Model Number: soybean oil solvent extraction line
- Voltage: 220V/380V
- Power(W): 1.5kw
- Dimension(L*W*H): 1700*1100*1600mm
- Weight: 30tons
- Machine Name: Soybean oil solvent extraction line
- Raw material: Oil Seeds
- Color: Silvery White
- Material: Steel
- Application: Oil Production
- Feature: Multifunction High Efficient
- Model: Continious
- Quality: Superior International
- Advantage: Energy Saving
Double pressing The expeller processed ground oilcake (ie the cake was re-expelled after passing through the chopper) at approximately 45 kg per hr to give a 19 per cent yield of crude oil. However, using oilcake the screw press was difficult to control, requiring
ICMIEE-PI-160363 Design and Construction of Oil Expeller Press with Structural Analysis of Screw with Ansys
- Production Capacity: 1-5000T/D
- Model Number: oil extracting machinery
- Voltage: 220V ,380V
- Power(W): 11KW
- Supplier Features: high quality machine ,high quality oil and cake
- Taste,smell: Has the inherent soya bean oil taste and smell,non odor
- Moisture and volatile matter%: less than0.2 after oil extracting machinery
- Insoluble wastes: less than 0.2
- Acid value mgKOH/g: less than 3
- Peroxide value mmol/kg: less than 6 after oil extracting machinery
- Saponified matter content%: less than 0.03
- Solvent residual(mg/kg): 50
- Heating test 280 degree: Little precipitate,lovibond colorimetric
The seeds are continuously fed to the expeller screw which grinds, crushes and presses the oil out as it passes through the machine. During this operation for high friction co-efficient it
Expeller pressing
- Production Capacity: 10-1000MT
- Model Number: According to specific model
- Voltage: 380V
- Power(W): 11KW
- Dimension(L*W*H): According to specific model
- Weight: According to model
- Name: oil making machine
- Material: Carbon Stee l Stainless Steel
- Application: oil press
- Advantage: new technology
- Application range: Sunflower Oil
- Feature: no waste water,air,pollution
- Product name: oil making machine
Expeller pressing (also called oil pressing) is a mechanical method for extracting oil from raw materials. The raw materials are squeezed under high pressure in a single step. When used for the extraction of food oils, typical raw materials are nuts , seeds and algae , which are supplied to the press in a continuous feed.
Performance Evaluation of a Screw Type Oil Expeller for Extraction of Sesame Oil
- Production Capacity: ≥92%
- Voltage: 380V
- Dimension(L*W*H): 1890*1385*1420
- Weight: 750 KG
- Core Components: Gearbox
- Oil Color: customized
- Raw material: various material
- Advantage: High Oil Output
- Function: Oil Pressing Peanut
- Use for: sunflower oil press line with filter
- Material: steel
- Capacity: 300kg per hour
- Extraction of Oilseeds: 96% Oil Yield
- Processing Types: Physical Press
- Used for: Oil Making Expeller
screw type oil expeller normally uses for coconut oil extraction. The extract bar clearance that was originally 0.1 mm, which was adjusted to 0.2 mm on one side and 0.3 mm other side. Another problem was the pressure releasing outlet on the cylindrical body
Design Consideration and Performance Evaluation of a Coconut Oil Extracting Machine - IJRASET
- Production Capacity: 1-800TPD
- Model Number: DTDC
- Voltage: 220/380V
- Power(W): 18.5KW
- Dimension(L*W*H): 1610x615x1260mm
- Weight: 1050 KG
- applicable to: rice bran, soybean, peanut, sunflower seed, rapeseed, and so on
- Technology: pressing, solvent extraction, physical and chemical refinery
- Machine Name: mini oil mill machinery
- Advantage: Energy Saving
- Feature: Multifunction
- Package: Wooden Case Special for mini oil mill machinery
- Projects done: mini oil mill machinery
- Residual: less than 0.5%
- filling line: supply
Refined Coconut Oil (RCO) had significantly lower moisture content that all Virgin Coconut Oil samples (Asian and Pacific Coconut Community, APCC, 2009). Enzymatic and centrifugation techniques had moisture content of 0.39 and 0.34%, respectively which were both above APCC set standard of < 0.2% as separation of water and oil phase is based on the centrifugal force used.
Design and Fabrication of Portable Oil Extruder - IJRERD
- Production Capacity: 10T-5000TPD
- Model Number: QIE FIRST
- Voltage: 220V/380V/440V
- Power(W): 10kw-50kw
- Dimension(L*W*H): 2500mm*2000mm*3000mm
- Weight: 2T-20T
- Name: QIE 50TPD cooking oil machine/oil pressing machine
- Materials: Carbon steel Q235 and SS304
- Water consumption: ≤ 0.3 t/t sunflower
- Power consumption: ≤ 12kwh/t sunflower
- Operate people: 2-3
- Circulating Water Cooling Water Yield: 150M3/H
- Supplier Finished product: Grade 1 cooking oil
The Oil Expeller is a screw type machine, which presses oilseeds through a caged barrel-like cavity. Raw materials enter from one side of the press and waste products exit the other side. The machine uses friction and continuous pressure from the screw as it drives in and compresses the seed material.